This professional, highly effective laser blocking system fits into window and door openings in operating rooms and is tested in compliance with IEC 60825-4, the laser safety standard. It is perfect for hospitals and other facilities where there is a need to prevent laser beams from escaping.
A straightforward lever opens and closes the window’s slats, allowing or preventing the penetration of laser light. The double-sided lever option allows you to activate the blind from either side. In order to keep dust and bacteria out of the slatted blind, the system places 6mm (0.24 inch) of toughened glass in front of it.
The unit can be installed as a standard fit within the door or window aperture or it can be fitted as a flush fit where the surfaces of the unit match those of the aperture edges.
STANDARD FIT
The fully bonded, semi-hermetic standard fit unit makes a tight seal between the glass and the beading possible while doing away with the necessity for an unclean metal housing. It can be placed flat on one side and have a single bead on the other, or centrally across the thickness of the door with a bead on either side. It is made up of three glass panes, two of which have alternating laser-blocking material lines. With the use of a handle, the central glass can be lifted or lowered, causing the lines to shift and providing completely adjustable and discrete visibility through the panel.
FLUSH-FIT
The flush-fit vision panel is made to precisely match the thickness of a door; hence, when installed, the glazing’s surface sits flush with the door faces. It is silicone mastic glued to the door, making it an extremely hygienic detail devoid of ledges or gaps where dirt or bacteria could hide. The flush fit unit is made of four glass panes, two of which include alternating lines of laser blocking material. It is entirely bonded and semi-hermetic.
Ordering Options
GLASS OPTIONS
- blackout glass
- obscure glass
- x-ray proof – lead equivalents up to 3.3mm (0.13 icnhes) thick
- security glass
- fire-glass – 30 and 60 minute, insulated and non-insulated
- antibacterial coated glass
- Outer glass panes available in toughened or laminated glass to comply with BS 6262
HANDLE OPTIONS
- standard lever
- anti-ligature conical knob
- both handles available in either 316 stainless steel or anti-bacterial copper alloy
- handles can be fitted to one or both sides on the Standard and Flush fit models
DIMENSIONS
- Standard widths and heights for all models are 200 x 600mm (7.87 x 23.62 inches), 400 x 400mm (15.75 x 15.75 inches), 400 x 600mm (15.75 x 23.62 inches) and 250 x 800mm (width x height) (9.84 x 31.50 inches). Standard thickness is 17mm (0.67 inches).
- Nominal thickness for Flush Fit model to suit customer door thickness.
